Foggy, Drafty Windows in Pompano Beach? FL Pro Roofing & Solar Replaces Them.

A window that fogs between the panes, sticks in its track, or lets a summer storm in at the sill needs attention. Some problems can be repaired, but a failing frame or aging window may be better replaced. FL Pro Roofing & Solar replaces windows across Pompano Beach in vinyl, aluminum, fiberglass, and wood, in every common style, permitted through the City of Pompano Beach Building Department and inspected before we close the job.

Based at 2141 NW 22nd St. Rated 5.0 stars across 152 Google reviews.

Schedule a Free Estimate

Name
Address

What Is Window Replacement?

Window replacement is the removal of an existing window unit (glass, sash, and in most cases the frame) and the installation of a new factory-built unit anchored and sealed to the opening, then inspected under a City of Pompano Beach building permit. 

It comes in two forms. An insert (or pocket) replacement leaves the original frame in place and sets a smaller new unit inside it. This is faster and cheaper but gives up glass area and depends on the old frame being sound. A full-frame replacement strips the opening back to the rough framing. This is the right call when the frame is corroded, rotted, or was never anchored to current standards, which describes most Pompano Beach homes built before 1994.

Frame materials

Vinyl

The most-installed replacement frame in Florida. Doesn’t corrode, doesn’t conduct heat, welded corners. Limited color range.

Aluminum

What most South Florida homes have now. Thin sightlines and strong, but it conducts heat unless thermally broken, and it pits in salt air.

Fiberglass

The stiffest, most dimensionally stable frame. Paintable. Priced at roughly 1.5–2x vinyl.

Wood

The traditional look. Highest maintenance in coastal humidity, so it’s usually clad in aluminum or fiberglass here.

Styles: single-hung and double-hung, horizontal sliding (the most common replacement style in South Florida block homes), casement, picture, and bay or bow projections.

One code note: Pompano Beach is inside Florida’s High-Velocity Hurricane Zone, so replacement windows generally need impact-resistant glazing or code-approved opening protection. A limited exception may apply to certain older homes replacing no more than 25% of their total glazed opening area within 12 months. If storm protection, not age or efficiency, is what’s driving the project, start with our Impact Windows page.

What Are the Signs You Need Window Replacement?

Window replacement is the answer when a window shows one of these seven things:

Fog or condensation between the panes. The insulated-glass seal has failed and the gas fill is gone. It cannot be resealed in the field.

A sash that won’t stay up, or a slider that takes two hands. Worn balances or rollers, and parts for 1980s-90s Florida aluminum units are often discontinued.

Air movement you can feel at the meeting rail on a windy day.

Single-pane glass. Standard in Pompano Beach homes built before the early 1990s unless someone has already replaced them.

White pitting or chalking on aluminum frames, or soft wood at the sill. The frame is corroding or rotting and is no longer holding its anchors.

Cooling bills climbing with no change to the AC. According to The Department of Energy, heat gain and heat loss through windows are responsible for 25%-30% of residential heating and cooling energy use.

Water at the sill, or on the wall below it, after a storm.

That last one is the one not to sit on. Water getting past a window frame is reaching the block or the wall cavity behind the stucco, and if the damage traces to a named storm, Fla. Stat. § 627.70132 gives you one year from the date of loss to file the initial claim. The window can wait a season. The claim can't.

Window Replacement vs. Repair — Which Do You Need?

A failed glass seal doesn’t always require replacing the entire window. The insulated-glass unit may be replaceable if the frame is sound. Full replacement makes more sense when the frame is failing or multiple aging windows have problems.

Repair your windows when:

  • One balance, roller, lock, or crank has failed and the frame is straight and tight
  • One pane is cracked in an otherwise sound insulated unit and the manufacturer still supplies the glass
  • The problem is a screen, a weep hole, or exterior caulk

Replace your windows when:

  • There’s fog between the panes and replacing the glass unit alone isn’t practical
  • The frame is pitted, rotted, racked, or pulling away from the stucco
  • It’s single-pane
  • Two or more windows on the house are showing the same symptom while the rest are on the same clock

A repair on a 30-year-old aluminum window buys time, not a result. If you're weighing the two on a specific window, send us a photo and we'll tell you which it is.

How Long Does Window Replacement Take?

Window replacement timelines for a typical 10-15-window Pompano Beach home depend on the installation scope, window availability, and permit approval.

A standard-size window takes about 45–90 minutes to remove, set, anchor, and seal. Stucco patching and interior trim add a day at the end. The final inspection is scheduled once the last window is in.

What the process looks like on your house

Measurement

Every opening is measured individually. Florida block homes rarely have two identical rough openings, and a window built to the wrong size fails inspection.

Product and permit

You choose frame material, style, glass package, and color. We then file the permit with the City of Pompano Beach Building Department, listing each window’s Florida Product Approval or Miami-Dade NOA number and the manufacturer’s installation drawing. Florida Building Code § 105.1 requires a permit for every window replacement. There is no small-job exemption.

Installation

Old unit out, opening cleaned and checked for rot or spalling, new unit set, shimmed, anchored per the manufacturer’s tested schedule, sealed inside and out, stucco or trim made good.

Inspection and close-out

The City inspects the installation against the approved drawings. We don’t consider the job done until the permit is closed and you have the paperwork.

How Much Does Window Replacement Cost in Pompano Beach?

Window replacement in Pompano Beach runs roughly $700 to $1,300 per window installed for a standard-size vinyl or aluminum non-impact unit, $1,000 to $2,500 for an impact-rated one, and $12,000 to $35,000 for a whole-home project of 12-18 openings. Broward pricing sits at the top of the Florida range because every product needs an HVHZ-tested approval and the permit process is more involved than upstate.

Window (standard size, installed)

Typical range

Vinyl, single-hung or slider

$700 – $1,200

Aluminum, single-hung or slider

$700 – $1,100

Vinyl casement

$1,000 – $1,600

Fiberglass

$1,200 – $2,000

Wood or clad wood

$1,000 – $2,500

Impact-rated, any frame

$1,000 – $2,500

Bay / bow / oversized picture

$1,500 – $3,500+

What moves the number

Insert vs. full-frame

Full-frame adds $200–$800 per opening for stucco and framing work, and is often unavoidable on pre-1994 aluminum.

Glass package

Low-E is standard; laminated impact glass adds $200–$600 per unit over standard double-pane.

Second story

Adds 20–40% to labor on those openings.

Permit

$75–$500 per project depending on scope, plus a required inspection.

Count

Per-window cost drops on whole-home jobs because permit, mobilization, and dumpster are spread across more openings.

Your written quote is fixed after measurement so there are no per-window surprises at install.

Why Choose FL Pro Roofing & Solar for Window Replacement in Pompano Beach?

Window replacement from FL Pro Roofing & Solar comes with three things most window-only outfits can’t offer: a contractor that already works the rest of your building envelope, a shop that’s eight minutes from most of Pompano Beach, and a 5.0-star rating across 152 Google reviews that you can read before you call.

We see the whole envelope

Water at a window sill and water at a roof edge end up in the same wall. Because we do roofing, windows, and solar, we’re not going to fix one leak and walk past the other.

Local, not a call center

We’re at 2141 NW 22nd St, Pompano Beach. We pull permits at the same City building counter you’d go to, and we know what the inspectors here look for.

Founded here, in 2022, by Eyal Babay

You’ll talk to the people who run the company, not a franchise.

Where We Replace Windows

Window replacement from FL Pro Roofing & Solar covers all of Pompano Beach: Palm Aire, Cresthaven, Kendall Green, Cypress Bend, Leisureville, Pompano Beach Highlands, Old Pompano, and the beachside east of Federal Highway. We also install windows in the neighboring cities of Lighthouse Point, Deerfield Beach, Coconut Creek, Margate, Oakland Park, Lauderdale-by-the-Sea, and northern Fort Lauderdale.

All of that territory is inside Broward County, so the same product-approval and permit rules apply throughout. If you’re across the county line in Boca Raton or Delray Beach, call us anyway. Palm Beach County follows a different set of code provisions, and we’ll tell you straight whether we’re the right fit for the job.

Window Replacement FAQ

Do I need a permit to replace windows in Pompano Beach?

Yes. Every time, under Florida Building Code § 105.1, with no exemption for single windows or like-for-like swaps. The City of Pompano Beach Building Department issues the permit, the application must list each window’s Florida Product Approval or Miami-Dade NOA number, and a field inspection is required before the permit closes. We handle the filing and the inspection scheduling.

No. The Energy Efficient Home Improvement Credit (Section 25C), which covered up to $600 per year for ENERGY STAR windows, was terminated for any property placed in service after December 31, 2025, under Public Law 119-21. Windows installed in 2026 do not qualify.

Usually. And the glass matters more than the frame. The Department of Energy attributes 25–30% of residential heating and cooling energy use to windows, and in Broward County the driver is solar heat gain, not insulation. A Low-E unit at SHGC 0.23 admits less than a third of the solar heat that clear single-pane glass does (about 0.79), and roughly 40% of what clear double-pane admits (about 0.58). The exact dollar savings depends on your window count, orientation, and shading. We’ll estimate it for your house rather than quote a national average.

Insert if the existing frame is straight, tight to the wall, and free of corrosion or rot. Full-frame if it isn’t, or if you want the full glass area back. Most 1970s–80s aluminum frames in Pompano Beach have enough pitting or anchor movement to warrant full-frame. We’ll tell you window by window at the measure.

If more than a third of them are showing symptoms, yes. The per-window price drops when permit, mobilization, and disposal are spread across the whole job, the glass matches, and you go through one inspection instead of three. If it’s one or two failed units in an otherwise recent set, replace those and match the existing product where possible.

Got a Window That Fogs, Sticks, or Leaks? Let’s Fix That.

It isn’t going to get better on its own, and if the frame is pitting or the sill is soft, the wall behind it is already paying for the delay. FL Pro Roofing & Solar will measure every opening at your Pompano Beach home, tell you which windows need replacing and which don’t, and give you a written price before anything is ordered.

See Why Your Neighbors Recommend FL Pro Roofing & Solar

(954) 803-7493